The Jaquet Speed Sensor DSF 2210.00 SHV (5m) with MPN: 374Z-03877 is specifically engineered for precision in monitoring rotary speeds through its advanced Hall effect sensor technology. It boasts a robust design that can generate square wave signals with exceptional reliability down to very low frequencies, ensuring accurate speed detection even under challenging conditions. With a short-circuit-proof push-pull output stage, it guarantees operational safety and stability. This sensor is an ideal choice for applications requiring precise speed measurements, providing both durability and performance.
Datasheet: DSF 2210.00 SHV (5m) (mpn: 374Z-03877) datasheet here
You can find this sensor with Standard Ambient Temperature cable here.
Jaquet Speed Sensor DSF 2210.00 SHV (5m) with MPN: 374Z-03877 is a high-precision device tailored for generating square wave signals proportional to rotary speeds, featuring a magnetically biased Hall effect semiconductor for accurate detection ensuring pulse generation down to a frequency of 0.05 Hz regardless of the sensor axis's rotational orientation.
Here are detailed specifications and features of DSF 2210.00 SHV (5m):
-
Supply Voltage: 10 V to 30 V, safeguarded against transient overvoltages and reverse polarity, ensuring robust performance in fluctuating power conditions.
-
Current Consumption: Maximum of 16 mA (without load), optimizing energy use while maintaining functionality.
-
Signal Output: Square wave, push-pull outputs with a maximum current of ±20 mA. It includes both pull-up and pull-down resistors to ensure signal integrity under varying load conditions.
-
Frequency Range: 0.05 Hz to 20 kHz, enabling accurate pulse generation over a wide range of speeds, from very slow rotations to high-speed operations.
-
Electromagnetic Compatibility (EMC): Complies with Directive 2004/108/EC EN 61000-6-2 and 61000-6-4 standards, ensuring resistance to electrostatic discharge, radiated electromagnetic fields, and fast electrical transients.
-
Housing: Stainless steel 1.4305, front side hermetically sealed, resistant against splashing water, oil, carbon- or ferrous dust, and salt mist. The electronics are potted in chemical and age-resistant synthetic resin, with a maximum allowable pressure on the sensor head of 10 bar.
-
Pole Wheel Requirements: Optimized for toothed wheels made of magnetically permeable material (e.g., Steel 1.0036), with specific recommendations for involute gear, tooth width, side offset, and eccentricity to ensure optimal performance.
-
Air Gap: Specifies the air gap range between the pole wheel and sensor housing for different modules, ensuring reliable operation without physical contact.
-
Insulation: Housing and electronics are galvanically separated, with a protection class of IP68 (head) and IP67 (cable outlet), offering high resistance to vibration (5 g in the range of 5 to 2000 Hz) and shock (50 g for 20 ms half sine wave).
-
Temperature Range: Operating temperatures for version H are -40° to +125°C, and for version T, -25° to +85°C, accommodating a wide range of environmental conditions.
-
Reliability: An MTTF of 3’177’000 hours and a failure rate of 314.8 FIT at an operating temperature of 60°C, based on Siemens SN29500, indicating high reliability excluding mechanical failure modes.
This comprehensive suite of features makes the DSF 2210.00 SHV (5m) sensor an ideal choice for applications requiring precise and reliable speed measurement in challenging environmental conditions, including industrial, automotive, and marine applications.
Approved by Germanischer Lloyd, it operates with a supply voltage of 10 V to 30 V, protected against transient overvoltages and reverse polarity, and has a maximum current consumption of 16 mA without load. Its output is a square wave with push-pull outputs, capable of handling ±20 mA with specific low and high voltage conditions. The sensor is robust, with a stainless steel housing resistant to various environmental conditions and capable of operating within a frequency range of 0.05 Hz to 20 kHz. It also demonstrates high immunity to vibrations and shocks, suitable for challenging industrial environments.
Check all Jaquet Speed Sensors here
