REMA 95850-10 DIN 640 A Plug / Male / Macho 120mm²

REMA 95850-10 DIN 640 120mm2 Plug

old catalog code was 95850-10, and is still marked as 95850/10 on the product zip-bags.

The new catalog code of this connector is 111160

Complete connector set including:

• DIN 640 Plug housing
• 2x main contacts for 120mm2 wire/cable
• The locking part (the square part in the middle)
• Cable stress relief parts (2 clamps + 2 screws)
• Grey coding pin for voltage indication

REMA 111160 / 95850-10 DIN 640 A plug 120mm² - grey coding - acid resistant

By default, this item does not include a handle. If you need a handle: the DIN 640 handle can be found here: REMA DIN 640 handle

This is the 640A plug/male/stecker/macho, used for charger/motor-side usually.

This is the original REMA DIN 640 high-power battery connector with an unrivaled current rating of 640 amps. The connector system has been specifically designed for the quick and opportunity charging of large battery capacities and corresponds to the DIN VDE 0632-589 and EN 1175-1.

POSSIBLE TO FIT 3 PAIRS OF AUXILIARY CONTACTS
As a special feature, it is possible to install an additional (third) pair of auxiliary contacts using the air-circulation pipes and the pilot contact kit.

REMA developed contacts made out of pure high conductive Cu-ETP copper with silver plated surface and an anti-friction and tarnish coating to ensure a power transition with minimal losses and long life. The DIN 640 battery connector is suitable for a wide range of cable sizes. The cable can be crimped directly without using a reducing bushing. For best performance results and durability, the specially developed REMA Crimp die sets and tools should be used.

Direct crimping without reducing bushing for all cable sizes REMA die sets and tools provide the best performance and durability.

Please ask for tools from our sales team.

Browse all REMA Connectors here